BPIR — Collated Gun Nails (range) — Press ⌘P (or Ctrl+P) and choose "Save as PDF" to download.
Kiwi Nails Issue 2026 · BPIR — Collated Gun Nails (range)
BPIR — Collated Gun Nails (range)

BPIR
— Collated Gun Nails (range)

Building Product Information Requirements declaration for Collated Gun Nails (range).

Kiwi Nails Fasteners Ltd · East Tamaki, Auckland · NZ
ISO 9001BRANZ
Kiwi Nails BPIR — Collated Gun Nails (range)

BPIR Declaration — Collated Gun Nails (range)

Issued under Section 362T of the Building Act 2004 and the Building (Building Product Information Requirements) Regulations 2022. Document reference KNF-BPIR-CGN-2026-05 · v1.0.

BRANZ reference
Manufactured under ISO 9001 quality management — controlled shank diameter, head dimension, tensile strength and zinc coating.
ISO 9001 manufactured
Quality-managed Kiwi Nails fastener manufacturing line.

1. Manufacturer / Importer

NZ legal entityKiwi Nails Fasteners Ltd
NZBN[to be inserted before issue]
ManufacturingKiwi Nails-owned and operated fastener manufacturing line — ISO 9001 certified
NZ storage & distribution6B Lorien Place, East Tamaki, Auckland 2013, New Zealand
Contactinfo@kiwinails.co.nz · 09 274 8588
Authorised representativeLinda Kong, Director

2. Product description

34° paper-collated framing nails covering D-head, jolt-head weatherboard, round-head, joist-hanger and ring-shank variants across bright, HD galvanised and stainless-steel grades.

SKU examples: RDHP, RDHP-J, RDHP-RH, RDHP-JH series SKUs

3. Certification & quality

ISO 9001Manufacturing line operates under ISO 9001 certified quality management — raw material inspection, galvanising, dimensional tolerance and packaging all documented.
BRANZ / product controlManufactured under ISO 9001 quality management — controlled shank diameter, head dimension, tensile strength and zinc coating.
GS1 New ZealandEvery pack carries a unique GS1-NZ-registered EAN-13 barcode (prefix 9420052).

4. Material & finish

Bright steel · HD Galvanised (AS/NZS 4680) · Stainless 304/316

5. Intended use & NZ Building Code compliance

B1 StructureUsed in the fastener schedule of NZS 3604 §2.4 and tables 4.10–4.13.
B2 DurabilityMaterial grade matched to exposure zone per E2/AS1 Table 20.
E2 External moistureS/ST304 suitable Zone C; S/ST316 suitable Zone D (sea spray).
F2 Hazardous materialsContains no lead, no cadmium, no asbestos. RoHS compliant.

6. Warranty

One-year replacement warranty on manufacturing defects. Warranty does not cover damage caused by incorrect installation, use outside the appraisal scope, or exposure conditions beyond the durability zone of the material grade selected.

Installation responsibility: Selection of fastener size, grade and quantity must be made by the project designer / structural engineer in accordance with NZS 3604 or the project's specific structural design. Always refer to the BRANZ Appraisal certificate and technical literature in full.

7. Declaration

I, the undersigned, declare on behalf of Kiwi Nails Fasteners Ltd that the information contained in this Building Product Information Requirements declaration is accurate to the best of my knowledge as at the date of signing, and that the products described are supplied with the certifications, materials and warranties set out above.

Signed
Linda Kong
Director, Kiwi Nails Fasteners Ltd
Date
Place: 6B Lorien Place, East Tamaki, Auckland 2013, New Zealand
Kiwi Nails Fasteners Ltd · 6B Lorien Place, East Tamaki, Auckland 2013, New Zealand · info@kiwinails.co.nz · 09 274 8588 · Director: Linda Kong
All Kiwi Nails products are manufactured under an ISO 9001 quality management system. Joist Hangers (BRANZ Appraisal #1132) and CPCs (BRANZ Appraisal #1133) hold current BRANZ Appraisals issued 25 Nov 2025. 90×3.15mm bright framing nail covered by BRANZ Standards Test ST1224 #101.
This document is reviewed annually and on any product specification change.